TL;DR
Get pool and patio gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Arbortech’s 200X Trench Blades are an Allsaw accessory for cutting narrow trenches in grass and soil, with a published maximum depth of 9 inches and width of 1.2 inches. Pro Tool Reviews reports that they fit the AS200Z and BA200X models, sell in six-packs for $99, and are intended for shallow landscaping work—not as a replacement for heavy-duty trenching equipment.
Arbortech’s 200X Trench Blades give owners of the company’s compatible Allsaw tools a dedicated option for cutting narrow trenches through grass and soil, according to a product report by Pro Tool Reviews. The blades are listed with a cutting depth of up to 9 inches and a width of 1.2 inches, making them aimed at shallow irrigation, cable and landscape-lighting runs rather than major excavation.
The blades are compatible with Arbortech’s AS200Z corded Allsaw and BA200X cordless Allsaw, the report says. They are not described as universal attachments for reciprocating saws, angle grinders or other standard tools. Buyers need one of the specified Allsaw models to use them.
Pro Tool Reviews gives the blades’ published cutting dimensions as up to 9 inches deep and 1.2 inches wide. The report identifies shallow irrigation, underground cable and landscape lighting as possible uses. It also advises readers to check applicable local codes, since required burial depths for cables and irrigation lines may exceed what this blade can cut.
The product is sold in a six-pack for $99, according to the report, which says the blades are available directly through Arbortech. It frames the attachment as one addition to an existing Allsaw setup, alongside other accessories intended for landscaping and work in or around masonry.
A Narrower Option for Yard Runs
For landscaping and grounds-care workers who already own a compatible Allsaw, the blades may offer a way to cut narrow channels without doing the entire job with a hand shovel. That could be useful for shorter runs of irrigation pipe, cable or lighting, although the source provides no timed test results or independent performance measurements to quantify any time savings.
The product’s limits matter as much as its intended use. A maximum depth of 9 inches does not establish that the tool can meet every project’s burial requirements, and the 1.2-inch width narrows the tasks for which it is suited. Pro Tool Reviews says it is not a replacement for a heavy-duty trenching machine. Its value is instead as a specialized accessory for people already using the Allsaw platform.
As an affiliate, we earn on qualifying purchases.
Where the Blades Fit the Allsaw Line
Arbortech sells multiple blades and accessories for its Allsaw tools. The report places the 200X trench blades among attachments aimed at extending the tools’ use for landscaping, and mentions a turf blade, a wood blade for roots and embedded branches, and an XL general-purpose blade for harder material below ground, such as concrete and limestone.
That product lineup is relevant because the trench blades are not presented as a standalone digging system. Their utility depends on owning a compatible Allsaw and on the material and depth involved. The source describes the blades as intended for grass and soil; it does not provide a full list of suitable ground conditions, operating instructions or independent test findings.
Pro Tool Reviews also cites an earlier comment from its editor-in-chief, Kenny Koehler, who imagined using an Allsaw to speed up a roughly 50-foot cable-burying job he had watched an internet installer dig by hand. That is an illustrative opinion, not a measured comparison of the trench blades against shoveling.
“With the ALLSAW, he would have had the trench done in minutes with far less effort.”
— Kenny Koehler, editor-in-chief of Pro Tool Reviews
Depth, Conditions and Test Data
The source does not give the report’s publication date, a formal launch date, or further details about availability beyond saying the blades can be purchased directly from Arbortech in a six-pack for $99. It also does not provide independent performance testing, cutting-speed figures, or information about how the blades perform across different soil types.
It is also not clear from the source what burial depth a particular project requires; that depends on applicable local rules and the line being installed. The published maximum depth of 9 inches should not be treated as evidence that the blades meet every code or job specification. Readers should confirm requirements and product compatibility before purchasing or beginning work.
Check Fit and Project Requirements
Readers considering the accessory can confirm current pricing, stock and compatibility with Arbortech or an authorized seller, since the report’s price and availability details may change. They should also check the instructions for their specific Allsaw model and verify local burial-depth rules before planning a cable, irrigation or lighting installation.
The source does not identify a scheduled follow-up, a new performance test or a broader release milestone. Any further information on availability, operating limits or measured performance would need to come from Arbortech or subsequent product testing.
Key Questions
Which tools work with Arbortech’s 200X Trench Blades?
Pro Tool Reviews lists compatibility with the AS200Z corded and BA200X cordless Allsaw. The report does not describe the blades as universal attachments for other tool brands or types.
How deep and wide can the blades cut?
The report gives a published maximum cutting depth of up to 9 inches and a trench width of 1.2 inches. Actual suitability depends on the job and ground conditions; the source does not provide independent test measurements.
What jobs are the blades intended for?
The reported uses include shallow runs for irrigation, underground cable and landscape lighting through grass and soil. They are described as an accessory for compatible Allsaw users, not heavy-duty trenching equipment.
How much do the blades cost?
Pro Tool Reviews reports a price of $99 for a six-pack, available directly through Arbortech. Confirm current pricing and stock with the seller before buying.
Can the blades cut deep enough for any cable or irrigation installation?
That is not established by the source. The listed maximum is 9 inches, while required burial depths depend on local codes and the installation. Check official local requirements and the product instructions before starting work.
Source: rss
Columbus Day / Indigenous Peoples' Day Picks
long weekend sales
As an affiliate, we earn on qualifying purchases.
